High tech from tip to handle, Global knives from Japan created a sensation when they burst onto the world's culinary stage as an alternative to traditional European-style cutlery. Blades are made of hard molybdenum/vanadium stainless steel and "face-ground" with a long taper rather than a short bevel so edges remain sharp longer than even the best high-carbon stainless-steel knives. Edges also are ground at a more acute angle than traditional European-style knives and arrive from the factory razor-sharp. Although Global also makes a "heavyweight" line for cooks who like hefty knives, its original knives-of which this one is an example-have thinner blades and are lighter than traditional European-style knives. This 10-inch chef's knife, however, is intended for large-handed cooks and is relatively heavy. Global also dispensed with bolsters on its original knives to reduce weight. Balance is achieved by injecting a precise amount of sand for a particular blade style into a hollow handle. To ensure balance is continuous, the sand flows inside the handle as a blade is maneuvered. A finger notch between blade and handle provides safety. Stainless-steel handles are Global's most striking feature. They're molded to fit the hand and dimpled to resist slipping. Smaller around than many European-style handles, they're easy for small-handed cooks to grasp and seamless for sanitation. Global recommends using a ceramic sharpener or a diamond steel instead of a metal sharpening steel for its knives, supplemented by a synthetic whetstone, a ceramic whetstone, or a Shinkansen sharpener. Global also makes a Sharpening Guide Rail so blades can be honed on a whetstone at the proper angle. Global knives should be hand washed to protect edges. They carry a lifetime warranty against defects and breakage. -Fred Brack.

A Shun edge, formed to an acute 16-degree angle, won't bend or waver due to the hardness of the VG-10 steel core used in its construction. Clad with 32 layers of high-carbon stainless steel (16 on each side), the blade resists rusting and maintain its razor edge for a considerable time. Prized among chefs who value uniformly thin slices, a necessity in Japanese cuisine, Shun knives are covered by a lifetime warranty and should be washed and dried-carefully-by hand, then stored in a wooden block. -Ann Bieri.

-Ann Bieri.

The material used is non-toxic and complies with the European rules. The material used will resist sudden temperature changes (from -40 degrees C to +150 degrees C), corrosive agents and detergents. This means that the knife can be cleaned in a dishwasher and sterilized. The handle is perfectly balanced with the blade. The handle's green color makes the knife immediately visible on the work bench: greater safety at work. The shape of the handle was designed at the computer. By creating the Premana Professional collection, the aim of Coltellerie Sanelli S. p. A. is to make a decisive contribution to improving safety, reliability and hygiene at work. No other collection of professional cutlery currently available has all these properties. The Premana Professional collection knives are covered by European and U. S. patents.

An all-round general workhorse for any kitchen, the knife measures 13-1/2 inches in overall length and makes a superb gift for the chef who enjoys preparing all types of cuisine. -Ann Bieri From the Manufacturer Twin Cuisine is the first quality forged knife to combine the comfort of a truly ergonomic, molded handle with the precision weight and balance of a full horizontal tang. Plus, the Twin Cuisine’s exclusive, award-winning patented handle design is a new standard in fine cutlery (U. S. design patent #D524,121). The series is available in many styles for numerous cutting tasks. Twin Cuisine is also available in a variety of block sets and gift sets. The Twin Cuisine series truly is a masterful blend of form and function. A Higher Standard in Knife Construction Twin Cuisine knives are traditionally forged from a single piece of J. A. Henckels’s exclusive high-carbon, no-stain steel formula. The result is a knife with high durability, professional strength, and weight. Twin Cuisine also uses J. A. Henckels’s Friodur ice-hardening process, which results in a blade that has excellent cutting-edge retention and corrosion resistance. The blade edge is precision honed and laser controlled to maintain a sharper and consistent blade angle. New Ergonomic Handle Technology The Twin Cuisine handle features exclusive new and innovative handle technology; a full horizontal tang without rivets. High-impact polypropylene is bonded with J. A. Henckels’s high carbon, no-stain steel, resulting in a remarkably comfortable handle with a smooth shape and no gaps. The world-famous Zwilling J. A. Henckels logo is etched on the end of every Twin Cuisine knife handle, indicating its quality. Features Traditional one-piece hot drop-forged construction: Provides high durability, strength, and weight. Laser-controlled edge: Is sharper and stays sharper longer. Has a more consistent blade angle. Friodur ice hardening: Maximum no-stain properties and more blade strength. Improved resistance to corrosion and pitting. Super bolster: Provides weight, insures safety, and adds balance. New, patented full horizontal handle tang without rivets: Provides a strong, smooth, comfortable handle with great control and balanced design. High-carbon no-stain steel, an exclusive J. A. Henckels formula: Nonstaining, nonrusting. Precision-honed blade: Is sharper and stays sharper longer. Dishwasher-safe: Easy care (although hand washing is recommended by J. A. Henckels). Full warranty: J. A. Henckels stands behind all its knives.

Leveraging a 90-year history of superior workmanship, Shun knives are precision-forged in Japan by renowned blade manufacturer KAI. Using technologically advanced processes, a VG-10 "super steel" core is clad with 16 layers of high-carbon stainless steel to produce a rust-free Damascus-look blade. The Damascus detailing not only enhances the knife’s aesthetic appeal, it also prevents morsels from sticking and avoids crushing or damaging foods. Forming a comfortable D-shaped hold, a fused blend of hardwood veneers and resin comprise the unique ebony Pakkawood handle. A traditionally offset stainless-steel bolster protects knuckles while a steel end-cap finishes the piece. Although dishwasher-safe, hand washing is recommended. The knife includes a lifetime warranty. - Amy Arnold.

Ships within 2 business days. Manufacturer's Warranty: One year manufacturers warranty.

Features of SIGMAFORGE?? knives are:New one piece constructionHigh forging precisionHigher stability of bladePerfect geometryImproved steel structure for less metal fatigueImproved cutting-edge retention and lasting sharpnessImproved weight and balanceFRIODUR?? ice hardened for maximum no-stain properties and more blade strength Distinguished by 18/10 stainless-steel, satin-finish handles, Twin Select knives embody Henckels's world-renowned craftsmanship. Henckels uses a high-tech welding process to form the knives in its first-rate cutlery lines. This process combines three types of high-carbon stainless steel into a single piece so that each part of a knife-blade, bolster, and tang-performs optimally. With a broad blade and curved edge for rocking through a chopping or mincing task, this 8-inch chef's knife suits most cooks. Shaped like a gentle wave to fit the hand snugly, the ergonomically designed handle contains a full rat-tail tang and is fully watertight with no gaps. Though the knife is dishwasher-safe, it should be hand washed to protect the edge. It carries a lifetime warranty against defects. -Fred Brack From the Manufacturer The Twin Select range is a master blend of function and design. These forged knives feature ergonomic 18/10 stainless-steel handles combined with blades made from J. A. Henckels’s exclusive high-carbon, no-stain steel formula. The result is a beautiful, award-winning knife that exudes elegance and is a pleasure to use. The Twin Select line contains knives for all tasks, including the following open stock knife types: parer, bread, sandwich, carving, chef’s, santoku, and others. Twin Select knives are also available in a range of block sets and gift sets, to be sure that your cutlery needs are covered. A Higher Standard in Knife Construction Twin Select knives are precision forged from a single piece of exclusive-formula, high-carbon, no-stain steel under the all-new Sigmaforge standard. As a result, Twin Select knives have improved quality consistency, lasting sharpness, and perfect geometry. Sigmaforge one-piece construction also provides high precision and improved stability of the blade and steel structure, thus improving cutting-edge retention for lasting sharpness. In addition, Twin Select knives use J. A. Henckels’s Friodur ice hardening for corrosion resistance, a process that also contributes to cutting-edge retention. New Ergonomic Handle Technology The Twin Select series features comfortable, ergonomic stainless-steel handles that accommodate each hand size while improving function, convenience, and safety. These patented handles are hygienic, colorfast, and break-proof (U. S. Patent #5791055). The quality of Twin Select can be recognized by the Zwilling J. A. Henckels logo featured on the end of the handle. Features: Sigmaforge one-piece, precision-forged construction: Provides perfect geometry, high precision, and improved stability of the blade and steel structure, thus improving cutting-edge retention for lasting sharpness. Laser-controlled edge: Is sharper and stays sharper longer. Has a more consistent blade angle. Friodur ice hardening: Maximum no-stain properties and more blade strength. Improved resistance to corrosion and pitting. Super bolster: Provides weight, insures safety, and adds balance. Full rat-tail tang: Provides a proper balance and greater strength. High-carbon, no-stain steel, an exclusive J. A. Henckels formula: Nonstaining, nonrusting. Precision-honed blade: Is sharper and stays sharper longer. Ergonomic 18/10 stainless-steel handle: Safer and more convenient to use for any hand size. Dishwasher-safe: Easy care (although hand washing is recommended by J. A. Henckels). Full warranty: J. A. Henckels stands behind all its knives.